Tech Support
- Technical support from FUSION Electronics
My FUSION-Link wireless Application displays “No stereos available”
The first thing to check is that you are connected to the correct wireless network for the 700 series.Once you have confirmed this close the App on the device and restart it (consult the manufacturers website for instructions on restarting) . If this fails check that you have a valid IP address on the 700 series and follow the instructions in the below tech support item
My FUSION-link wireless remote Application will not connect to my 700 series stereo.
My FUSION-Link wireless remote Application will not connect to my 700 series stereo.
The first thing to check is that the 700 series is displaying a valid IP address on the about screen. Select the settings menu then about to confirm. If the display is " IPNone " the router is either not a compatible DHCP product or not configured correctly. If the IP address starts with the prefix 169. it is not valid, this is a default address when the router is not sending a DHCP generated IP address or is configured incorrectly.Please review the Router's instruction manual or contact the manufacturers website for technical help.
